Rackmount RJ Panel
What’s MarketSpark provides
For MarketSpark SKU: 106-0065
25 ft ICC 25-Pair Telco Cable - female
ICC Telco 24 Port Patch Panel – male
4 screws
MarketSpark SKU 106-0064 is a Female to Male 25-Pair 25-foot extension cable, available for customers that require extended runs.
Panel Front Image
This is an image of the front of the panel
Install instructions
Run 25 ft Telco Cable from MarketSpark unit to client’s rack/cabinet
Ensure that the pin side is at the rack, and the blunt end (raw cable side) at the MarketSpark 66 block.
Confirm with the on-site contact the desired path of cable
Attach a 50-pin female telco connector (RJ21) to a male telco connector
Loosen the Velcro wrap without detaching it from the metal bracket, and remove the dust cover from the male telco connector. Then insert the female connector into the Velcro wrap. Plug the female connector into the male telco connector and tighten the Velcro wrap to secure the connectors
Mount ICC Telco 24 Port Patch Panel to the client’s onsite rack/cabinet
Confirm patch panel mount location with on-site contact
Attach the panel to the rack/cabinet with the provided (4) screws
Attach a 25-pair cable to the 66-block
Strip back the cable jacket to expose bare copper in prep for punch down
Do not cut excess wire off!
Once the patch panel has been mounted, proceed with the cutover
Punch lines to the right side of the MarketSpark block
Follow the following color code
|
|